TY-550s is a vertical turning–milling center for reviewing turned features and driven-tool operations on the same part. Its stated machining diameter is 450 mm, with a 12-station BMT65 turret and driven-tool speed up to 4000 rpm. Check the separate turning and boring limits with the part, fixture and tools; your representative confirms the final configuration.
- Process
- Turning, Milling
- Workpieces
- Part, workholding, tool access and clearances require individual engineering confirmation.
Review specifications
VT1355 is a drilling and tapping center with a 1400 × 500 mm table, 1400 × 500 × 350 mm X/Y/Z-axis travels and a maximum table load of 800 kg. Its tool magazine holds 21 tools. Review the part, fixture and tool access together, then ask engineering to confirm the spindle configuration and machining plan.
- Process
- Drilling, Tapping, Milling
- Workpieces
- Fixture-mounted part proposals; part dimensions, clamping, clearances and tool access require engineering review.
Review specifications
VT1155 is a drilling and tapping center with a 1100 × 500 mm table, 1200 × 500 × 350 mm X/Y/Z-axis travels and a maximum table load of 800 kg. Its tool magazine holds 21 tools. Review the part, fixture and tool access together, then ask engineering to confirm the spindle configuration and machining plan.
- Process
- Drilling, Tapping, Milling
- Workpieces
- Fixture-mounted part proposals; part dimensions, clamping, clearances and tool access require engineering review.
Review specifications
VT850 is a drilling and tapping center with a 1000 × 500 mm table, 800 × 500 × 350 mm X/Y/Z-axis travels and a maximum table load of 500 kg. Its tool magazine holds 21 tools. Review the part, fixture and tool access together, then ask engineering to confirm the spindle configuration and machining plan.
- Process
- Drilling, Tapping, Milling
- Workpieces
- Fixture-mounted part proposals; part dimensions, clamping, clearances and tool access require engineering review.
Review specifications
TG650 is a vertical turning and milling center for reviewing round-part machining. It lists a 650 mm maximum workpiece swing diameter, 1200 mm X-axis travel and separate turning and milling spindles rated up to 600 rpm and 12000 rpm. Compare these limits separately, then confirm the part, fixture, tools and required operations with engineering.
- Process
- Turning, Milling
- Workpieces
- Disc, ring and flange proposals; drawing, fixture and tool-access review required.
Review specifications
TG450 is a vertical turning and milling center for reviewing round-part machining. It lists a 450 mm maximum workpiece swing diameter, 700 mm X-axis travel and separate turning and milling spindles rated up to 4000 rpm and 12000 rpm. Compare these limits separately, then confirm the part, fixture, tools and required operations with engineering.
- Process
- Turning, Milling
- Workpieces
- Disc, ring and flange proposals; drawing, fixture and tool-access review required.
Review specifications
JAB60 is a horizontal machining center for assessing milling and drilling work. Its listed X/Y/Z travels are 1300 × 600 × 500 mm, with a 24-position tool magazine and maximum spindle speed of 18000 rpm. Review the drawing, fixture and tool access before choosing a setup. Workpiece clearance, material suitability and loading equipment require engineering confirmation.
- Process
- Milling
- Workpieces
- Housing, bracket and fixture-part proposals; drawing, clamping and tool-access review required.
Review specifications
JB60 is a horizontal machining center for assessing milling and drilling work. Its listed X/Y/Z travels are 1300 × 600 × 500 mm, with a 24-position tool magazine and maximum spindle speed of 18000 rpm. Review the drawing, fixture and tool access before choosing a setup. Workpiece clearance, material suitability and loading equipment require engineering confirmation.
- Process
- Milling
- Workpieces
- Housing, bracket and fixture-part proposals; drawing, clamping and tool-access review required.
Review specifications
JAB50 is a horizontal machining center for assessing milling and drilling work. Its listed X/Y/Z travels are 1000 × 500 × 400 mm, with a 24-position tool magazine and maximum spindle speed of 18000 rpm. Review the drawing, fixture and tool access before choosing a setup. Workpiece clearance, material suitability and loading equipment require engineering confirmation.
- Process
- Milling
- Workpieces
- Housing, bracket and fixture-part proposals; drawing, clamping and tool-access review required.
Review specifications
JB50 is a horizontal machining center for assessing milling and drilling work. Its listed X/Y/Z travels are 1000 × 500 × 400 mm, with a 24-position tool magazine and maximum spindle speed of 18000 rpm. Review the drawing, fixture and tool access before choosing a setup. Workpiece clearance, material suitability and loading equipment require engineering confirmation.
- Process
- Milling
- Workpieces
- Housing, bracket and fixture-part proposals; drawing, clamping and tool-access review required.
Review specifications
