What distinguishes the TNX6510?
- Turning and milling capabilities within the TNX five-axis turn-mill family.
- Separate C1 and C2 turning spindles, each with a maximum speed of 5000 rpm.
- A milling spindle with a maximum speed of 8000 rpm.
- X, Y and Z travel of 685 mm, 260 mm and 1100 mm respectively.
How should you evaluate the machine?
Compare the specifications above with your stock size, finished-part geometry, workholding and tool-clearance requirements. Maximum machining dimensions and axis travels describe different limits; the usable working envelope must be checked for the proposed setup.
Share the required turning and milling operations, material grade, critical tolerances and inspection requirements. Confirm the supplied configuration against your application before ordering.
What does the machine image show?
The image is a TNX-series bare-machine illustration used for the TNX6510 model, not an engineering drawing or a performance test. It is not a photograph of a specific supplied machine. Confirm the supplied configuration in the technical agreement.
TNX6510 questions and answers
What is the maximum machining size?
The stated maximum machining length is 1000 mm and maximum machining diameter is 650 mm. Check tool and workholding clearances for your part.
What are the X, Y and Z travels?
X-axis travel is 685 mm, from -125 to +560 mm. Y-axis travel is 260 mm, from -130 to +130 mm. Z-axis travel is 1100 mm.
Are the turning and milling spindle speeds the same?
No. The C1 and C2 turning spindles each have a maximum speed of 5000 rpm. The milling spindle has a maximum speed of 8000 rpm. These are separate specifications.
Does the cover image confirm the supplied configuration?
No. It is a TNX-series illustration for orientation. Confirm the supplied configuration, application requirements and acceptance criteria with Tiezheng.
What should I send for a quotation?
Send the workpiece drawing, material grade, stock size, required operations, critical tolerances and production volume. Include electrical requirements and destination country.
Discuss your TNX6510 application
Request a TNX6510 quotation or browse Tiezheng machines.
Which Tiezheng TNX6510 specifications should buyers check?
The published Tiezheng TNX6510 specifications include Maximum machining diameter: 650 mm; X-axis travel: 685 (-125 to +560) mm; Y-axis travel: 260 (-130 to +130) mm. Treat travel, cutting capacity, workholding clearance and load as separate limits. Use the full specification table to check the proposed configuration; these values do not by themselves establish material suitability, achievable part tolerance or cycle time.
Read the full Tiezheng TNX6510 specification table.
Does this specification confirm suitability for my industry?
Industry labels alone do not establish a machining process. Start with the dimensions, operations and material information you know; a drawing can follow after the first contact. Confirm material grade and hardness, tolerances, stock condition, production volume and fixture requirements with the contact before agreeing the supplied configuration.
How can I compare this model and request a quotation?
Compare up to three models by the same specification label and unit. An omitted value is not zero, and an optional value is not a standard configuration. Keep the model name with your inquiry so the sales team can review the correct machine.
Confirm the TNX6510 configuration for your part
Use the published specifications to shortlist this model, then confirm the configuration with the contact listed on this site. Axis travel, workpiece capacity and table load describe different limits; they do not establish finished-part tolerance, material suitability or cycle time. A drawing is optional for the first contact. Machine prices and formal quotations are provided directly by the contact, not by this website.
- Check the published data. Read the available specification labels, units and configuration notes. Ask the contact for missing technical data for this exact model. An omitted value is not zero.
- Confirm the supplied configuration. Ask the contact for configuration-specific technical information. Confirm standard and optional equipment, tooling, workholding and acceptance requirements; do not assume an unlisted feature is included.
- Discuss your requirement. Start with the dimensions and operations you know. Agree a suitable channel for confidential drawings directly with the contact.
Does submitting an inquiry confirm the machine or a quotation?
No. An inquiry starts a discussion. The contact must confirm the proposed configuration and commercial terms with you; submitting a form is not machine acceptance or a formal quotation.
Discuss TNX6510 with the contact
