What is this machine used for?
What is the Tiezheng SVA/T2550?
The SVA/T2550 is a moving-column machining center for workpieces that fit its worktable and travel envelope. Compare the specifications below with your part dimensions, fixture arrangement and machining requirements.
Which worktable and travel values are documented?
The machine specifications include a 3000 x 500 mm worktable, 2500 x 550 mm X/Y travel, 550 mm standard Z travel and 700 mm optional Z travel. Fixture length, support, tool access and the required Z configuration must be checked against the part drawing.
Which standard spindle and tool data are documented?
Standard specifications include a BT40 direct-drive spindle at 12000 rpm and a 24-tool magazine. Confirm the control system, electrical standard, tooling package and any alternative configuration in the quotation.
Which configuration details should buyers confirm?
Discuss control, spindle and tool-magazine requirements, chip management, machine construction and automation with Tiezheng. Availability and compatibility must be confirmed for the selected configuration; series-level images are not a specification for the supplied machine.
How should buyers compare the SVA/T2550?
Use the specifications below to compare worktable length, X/Y travel, the standard or optional Z envelope, spindle interface, drive, speed and tool capacity. Confirm tolerances, process sequence, fixture support and acceptance method through RFQ.
What should be sent for an SVA/T2550 RFQ?
Send the part drawing, material, critical tolerances, overall workpiece length, annual volume, target cycle time, required operations, preferred control, workholding or automation requirement, electrical standard and destination country.
Does this page define the final supplied machine?
No. It supports initial technical screening. The signed quotation, technical agreement and acceptance record must confirm the complete supplied configuration and process capability.
Which Tiezheng SVA/T2550 specifications should buyers check?
The published Tiezheng SVA/T2550 specifications include Worktable size: 3000 x 500 mm; X/Y axis travel: 2500 x 550 mm; Standard Z-axis travel: 550 mm. Treat travel, cutting capacity, workholding clearance and load as separate limits. Use the full specification table to check the proposed configuration; these values do not by themselves establish material suitability, achievable part tolerance or cycle time.
Read the full Tiezheng SVA/T2550 specification table.
Does this specification confirm suitability for my industry?
Industry labels alone do not establish a machining process. Start with the dimensions, operations and material information you know; a drawing can follow after the first contact. Confirm material grade and hardness, tolerances, stock condition, production volume and fixture requirements with the contact before agreeing the supplied configuration.
How can I compare this model and request a quotation?
Compare up to three models by the same specification label and unit. An omitted value is not zero, and an optional value is not a standard configuration. Keep the model name with your inquiry so the sales team can review the correct machine.
Confirm the SVA/T2550 configuration for your part
Use the published specifications to shortlist this model, then confirm the configuration with the contact listed on this site. Axis travel, workpiece capacity and table load describe different limits; they do not establish finished-part tolerance, material suitability or cycle time. A drawing is optional for the first contact. Machine prices and formal quotations are provided directly by the contact, not by this website.
- Check the published data. Read the available specification labels, units and configuration notes. Ask the contact for missing technical data for this exact model. An omitted value is not zero.
- Confirm the supplied configuration. Ask the contact for configuration-specific technical information. Confirm standard and optional equipment, tooling, workholding and acceptance requirements; do not assume an unlisted feature is included.
- Discuss your requirement. Start with the dimensions and operations you know. Agree a suitable channel for confidential drawings directly with the contact.
Does submitting an inquiry confirm the machine or a quotation?
No. An inquiry starts a discussion. The contact must confirm the proposed configuration and commercial terms with you; submitting a form is not machine acceptance or a formal quotation.
Discuss SVA/T2550 with the contact
