What is this machine used for?
What is the Tiezheng SMA/T2030?
The SMA/T2030 is part of Tiezheng’s SMA family of machining centers. Its key specifications cover the worktable, axis travel, spindle, feeds, guide listings, accuracy entries, utilities and machine envelope for initial comparison. Optional configurations and the final supply scope are confirmed during drawing-led RFQ review.
Which worktable and travel values are documented?
The catalog lists a 2000 x 3000 mm worktable, 2000 x 3000 mm X/Y-axis travel, 550 mm Z-axis travel, 2200 mm gantry width and 5 t maximum worktable load. Confirm the actual part, fixture, clearance, support and access requirements through RFQ.
Which spindle and feed values can be screened?
The published specifications list a BT40 direct-drive spindle specification, mechanical spindle drive structure, 12000 rpm spindle speed, 32.48 m/min X/Z-axis rapid feed, 48 m/min Y-axis rack rapid feed and 1-30000 mm/min cutting-feed entry. Final spindle and motion configuration remains subject to RFQ confirmation.
Which accuracy and installation values are visible?
The specification table lists catalog positioning, repeat-positioning, movement, machine-envelope, mass, power, coolant and lubrication values for model comparison. Final process capability and finished-part requirements are confirmed during engineering review.
Which SMA/T2030 details require RFQ confirmation?
Confirm the optional spindle, tool magazine, Y-axis lead screw, chip-removal configuration, servo specification and pressure requirements for the selected machine during RFQ review.
What should be sent for an SMA/T2030 RFQ?
Send 2D and 3D part drawings, material, hardness, machining allowance, critical tolerances, surface finish, workpiece mass and envelope, annual volume, target cycle time, required operations, control and spindle requirements, tooling, workholding, automation, coolant and chip-handling needs, electrical standard, acceptance method and destination country.
Which Tiezheng SMA/T2030 specifications should buyers check?
The published Tiezheng SMA/T2030 specifications include Worktable size: 2000 x 3000 mm; X/Y-axis travel: 2000 x 3000 mm; Z-axis travel: 550 mm. Treat travel, cutting capacity, workholding clearance and load as separate limits. Use the full specification table to check the proposed configuration; these values do not by themselves establish material suitability, achievable part tolerance or cycle time.
Read the full Tiezheng SMA/T2030 specification table.
Does this specification confirm suitability for my industry?
Industry labels alone do not establish a machining process. Start with the dimensions, operations and material information you know; a drawing can follow after the first contact. Confirm material grade and hardness, tolerances, stock condition, production volume and fixture requirements with the contact before agreeing the supplied configuration.
How can I compare this model and request a quotation?
Compare up to three models by the same specification label and unit. An omitted value is not zero, and an optional value is not a standard configuration. Keep the model name with your inquiry so the sales team can review the correct machine.
Confirm the SMA/T2030 configuration for your part
Use the published specifications to shortlist this model, then confirm the configuration with the contact listed on this site. Axis travel, workpiece capacity and table load describe different limits; they do not establish finished-part tolerance, material suitability or cycle time. A drawing is optional for the first contact. Machine prices and formal quotations are provided directly by the contact, not by this website.
- Check the published data. Read the available specification labels, units and configuration notes. Ask the contact for missing technical data for this exact model. An omitted value is not zero.
- Confirm the supplied configuration. Ask the contact for configuration-specific technical information. Confirm standard and optional equipment, tooling, workholding and acceptance requirements; do not assume an unlisted feature is included.
- Discuss your requirement. Start with the dimensions and operations you know. Agree a suitable channel for confidential drawings directly with the contact.
Does submitting an inquiry confirm the machine or a quotation?
No. An inquiry starts a discussion. The contact must confirm the proposed configuration and commercial terms with you; submitting a form is not machine acceptance or a formal quotation.
Discuss SMA/T2030 with the contact
