What is this machine used for?
Does table size equal the usable workpiece envelope?
No. The listed 1100 × 500 mm table and 1000 × 500 × 500 mm X/Y/Z travels describe different dimensions. Account for fixtures, tool length, access and collision clearance. A drawing review is needed before selecting a workpiece envelope.
Which spindle speed belongs to which configuration?
The standard belt-drive spindle is listed at 10000 rpm; the optional direct-drive spindle is listed at 12000 rpm. These are separate configurations. State the required drive when requesting a quotation.
Can the maximum table load be used without checking the fixture?
The listed maximum table load is 800 kg. Review the total workpiece and fixture load, its placement and machining forces with the configuration team; the published load alone is not a complete setup approval.
Does a listed parameter prove machining performance?
No. Published travels, spindle data and accuracy entries do not establish a cycle time, material-removal rate or finished-part result. Provide material, tools, tolerances and inspection requirements for a process review.
What should I include in a quotation request?
Identify V1055 in your message and include the drawing revision, material, part dimensions, tolerances, operations, production quantity, fixture concept, tools, spindle configuration and delivery destination.
How can I compare this machine with an existing catalogue model?
Use the machine selector and comparison guide to review published specifications. Match parameter labels and units, keep standard and optional configurations separate, and ask the team to resolve any missing requirement before ordering.
Specifications describe the listed model configuration. Confirm the selected equipment, tooling and installation requirements in the final quotation.
Which Tiezheng V1055 specifications should buyers check?
The published Tiezheng V1055 specifications include Table size: 1100 × 500 mm; X/Y/Z-axis travel: 1000 × 500 × 500 mm; Maximum table load: 800 kg. Treat travel, cutting capacity, workholding clearance and load as separate limits. Use the full specification table to check the proposed configuration; these values do not by themselves establish material suitability, achievable part tolerance or cycle time.
Read the full Tiezheng V1055 specification table.
Does this specification confirm suitability for my industry?
Industry labels alone do not establish a machining process. Start with the dimensions, operations and material information you know; a drawing can follow after the first contact. Confirm material grade and hardness, tolerances, stock condition, production volume and fixture requirements with the contact before agreeing the supplied configuration.
How can I compare this model and request a quotation?
Compare up to three models by the same specification label and unit. An omitted value is not zero, and an optional value is not a standard configuration. Keep the model name with your inquiry so the sales team can review the correct machine.
Confirm the V1055 configuration for your part
Use the published specifications to shortlist this model, then confirm the configuration with the contact listed on this site. Axis travel, workpiece capacity and table load describe different limits; they do not establish finished-part tolerance, material suitability or cycle time. A drawing is optional for the first contact. Machine prices and formal quotations are provided directly by the contact, not by this website.
- Check the published data. Read the available specification labels, units and configuration notes. Ask the contact for missing technical data for this exact model. An omitted value is not zero.
- Confirm the supplied configuration. Ask the contact for configuration-specific technical information. Confirm standard and optional equipment, tooling, workholding and acceptance requirements; do not assume an unlisted feature is included.
- Discuss your requirement. Start with the dimensions and operations you know. Agree a suitable channel for confidential drawings directly with the contact.
Does submitting an inquiry confirm the machine or a quotation?
No. An inquiry starts a discussion. The contact must confirm the proposed configuration and commercial terms with you; submitting a form is not machine acceptance or a formal quotation.
Discuss V1055 with the contact
