What is this machine used for?
What is the Tiezheng VW63C?
The VW63C is part of Tiezheng’s VW-series machining-center range. Its key specifications cover worktable, load, supported workpiece dimensions, spindle, tooling, motion, utilities and machine envelope for initial comparison. Configuration details are confirmed during drawing-led RFQ review, and the final supply scope is defined in the signed technical agreement.
Which worktable and workpiece limits are documented?
The catalog lists a 630 x 630 mm worktable, 1100 kg maximum worktable load and a 600 / 1300 mm maximum workpiece height / diameter entry. Confirm fixture height, rotary clearance, tool access, support and the paired-value interpretation against the actual part drawing.
Which spindle, tooling and motion values can be screened?
The published specifications list a BT50 tool holder, 6000 rpm catalog-listed standard vertical / horizontal spindle speed, 18.5 / 18.5 kW spindle motor power, 24 / 24 tool positions and 32/32/32 m/min X/Y/Z rapid traverse. Final spindle, magazine and axis configuration remains subject to RFQ confirmation.
Which details require RFQ confirmation?
Confirm directional work-envelope values, spindle-to-table ranges, custom division, tool diameter, servo values, pressure, optional spindle and chip-removal methods, magazine structure and controller architecture for the selected configuration during RFQ review.
How should buyers compare the VW63C?
Use the documented table, load, workpiece entry, spindle, tooling, traverse, utility and installation rows for initial screening, then confirm clearances and the complete machine configuration through RFQ.
What should be sent for a VW63C RFQ?
Send 2D and 3D part drawings, material, hardness, machining allowance, critical tolerances, surface finish, workpiece mass and envelope, annual volume, target cycle time, required operations, control and spindle requirements, tooling, workholding, automation, coolant and chip-handling needs, electrical standard, acceptance method and destination country.
Which Tiezheng VW63C specifications should buyers check?
The published Tiezheng VW63C specifications include Maximum worktable load: 1100 kg; Catalog-listed standard vertical / horizontal spindle speed: 6000 rpm; Spindle positioning structure: Cross-saddle layout. Treat travel, cutting capacity, workholding clearance and load as separate limits. Use the full specification table to check the proposed configuration; these values do not by themselves establish material suitability, achievable part tolerance or cycle time.
Read the full Tiezheng VW63C specification table.
Does this specification confirm suitability for my industry?
Industry labels alone do not establish a machining process. Start with the dimensions, operations and material information you know; a drawing can follow after the first contact. Confirm material grade and hardness, tolerances, stock condition, production volume and fixture requirements with the contact before agreeing the supplied configuration.
How can I compare this model and request a quotation?
Compare up to three models by the same specification label and unit. An omitted value is not zero, and an optional value is not a standard configuration. Keep the model name with your inquiry so the sales team can review the correct machine.
Confirm the VW63C configuration for your part
Use the published specifications to shortlist this model, then confirm the configuration with the contact listed on this site. Axis travel, workpiece capacity and table load describe different limits; they do not establish finished-part tolerance, material suitability or cycle time. A drawing is optional for the first contact. Machine prices and formal quotations are provided directly by the contact, not by this website.
- Check the published data. Read the available specification labels, units and configuration notes. Ask the contact for missing technical data for this exact model. An omitted value is not zero.
- Confirm the supplied configuration. Ask the contact for configuration-specific technical information. Confirm standard and optional equipment, tooling, workholding and acceptance requirements; do not assume an unlisted feature is included.
- Discuss your requirement. Start with the dimensions and operations you know. Agree a suitable channel for confidential drawings directly with the contact.
Does submitting an inquiry confirm the machine or a quotation?
No. An inquiry starts a discussion. The contact must confirm the proposed configuration and commercial terms with you; submitting a form is not machine acceptance or a formal quotation.
Discuss VW63C with the contact
