What is this machine used for?
Which TC36 configuration do these specifications describe?
The specifications on this page refer to the TC36 gang-tool CNC lathe configuration. They are reference values for reviewing a proposed machine, not a test report for your workpiece. Confirm the final supplied parameters, tooling and acceptance criteria in the technical agreement.
How should the work envelope be checked?
Review maximum swing over bed, shaft turning diameter, disc turning diameter, bar diameter and machining length as separate limits. Swing over bed is not the same as cutting capacity, and X-axis travel is not a workpiece diameter. Submit the drawing and proposed workholding for clearance and tool-access review.
Which configuration details should I confirm before ordering?
Confirm the spindle interface and taper, chuck selection, guideway and screw specifications, chip-discharge direction and surface-finish requirements in your quotation. The automatic chain-plate chip conveyor is optional; do not assume it is included.
Do the accuracy figures guarantee my finished part?
No. Published repeatability, roundness, diameter-consistency and flatness figures are reference machine specifications, not results from a completed test on your part. Agree the material, tooling, workholding, measurement method, operating conditions and acceptance limits for your drawing before ordering.
What should I include in a TC36 quotation request?
Send the drawing revision, material and hardness, blank dimensions, critical tolerances, required operations, batch size, target cycle time, workholding needs, automation requirements, electrical standard and destination country. Use the machine RFQ checklist to separate required equipment from optional items.
Where can I obtain the current TC36 specification sheet?
The table refers to the TC36 gang-tool configuration in Tiezheng technical documentation, machine-parameter tables on pages 7 and 8. The document states that these parameters are for reference and the actual factory-supplied parameters take precedence. Request the current configuration-specific specification sheet with your quotation.
For initial route comparison, review the published turning models and CNC machine comparison guide. The final machine choice depends on the drawing, required operations and proposed configuration.
Which Tiezheng TC36 specifications should buyers check?
The published Tiezheng TC36 specifications include Maximum X-axis travel: 600 mm; Maximum Z-axis travel: 300 mm; Maximum machining length: 300 mm. Treat travel, cutting capacity, workholding clearance and load as separate limits. Use the full specification table to check the proposed configuration; these values do not by themselves establish material suitability, achievable part tolerance or cycle time.
Read the full Tiezheng TC36 specification table.
Does this specification confirm suitability for my industry?
Industry labels alone do not establish a machining process. Start with the dimensions, operations and material information you know; a drawing can follow after the first contact. Confirm material grade and hardness, tolerances, stock condition, production volume and fixture requirements with the contact before agreeing the supplied configuration.
How can I compare this model and request a quotation?
Compare up to three models by the same specification label and unit. An omitted value is not zero, and an optional value is not a standard configuration. Keep the model name with your inquiry so the sales team can review the correct machine.
Confirm the TC36 configuration for your part
Use the published specifications to shortlist this model, then confirm the configuration with the contact listed on this site. Axis travel, workpiece capacity and table load describe different limits; they do not establish finished-part tolerance, material suitability or cycle time. A drawing is optional for the first contact. Machine prices and formal quotations are provided directly by the contact, not by this website.
- Check the published data. Read the available specification labels, units and configuration notes. Ask the contact for missing technical data for this exact model. An omitted value is not zero.
- Confirm the supplied configuration. Ask the contact for configuration-specific technical information. Confirm standard and optional equipment, tooling, workholding and acceptance requirements; do not assume an unlisted feature is included.
- Discuss your requirement. Start with the dimensions and operations you know. Agree a suitable channel for confidential drawings directly with the contact.
Does submitting an inquiry confirm the machine or a quotation?
No. An inquiry starts a discussion. The contact must confirm the proposed configuration and commercial terms with you; submitting a form is not machine acceptance or a formal quotation.
Discuss TC36 with the contact
