What is this machine used for?
What is the Tiezheng SFA/T2012?
Which SFA/T2012 specifications are published?
Key published specifications include a 2000 × 1200 mm worktable, X-axis travel of 2100 mm, Y-axis travel of 1200 mm, Z-axis travel of 550 mm and gantry width of 2230 mm.
How should buyers evaluate the SFA/T2012?
Start with the part drawing and machining requirements. Engineering review should confirm part geometry, weight, material, tolerances, operations, fixture clearance, cutter access, tooling, chip handling, utilities, automation, cycle target, electrical standard and destination requirements.
How is an SFA/T2012 quotation prepared?
The RFQ is reviewed against the drawing, production target, utilities and required delivery scope before the signed technical agreement and quotation are issued.
Are SFA2012 and SFA/T2012 the same model?
Yes. SFA2012 and SFA/T2012 are two designations for the same model.
What should buyers send for an SFA/T2012 RFQ?
Send the part drawing, material, overall dimensions and weight, critical tolerances, required operations, annual volume, target cycle time, workholding or automation requirements, electrical standard and destination country.
Does this page define the supplied spindle, controller or tool magazine?
No. The spindle, CNC control and tool-magazine configuration are confirmed for the supplied machine in the signed technical agreement.
How should the stated worktable and travel values be applied?
Engineering review must confirm the complete part and fixture envelope, support, tool access, load distribution and safe setup before quotation.
How is the supplied configuration confirmed?
The supplied configuration is confirmed against the buyer’s drawing, process, utilities and signed technical agreement before quotation and supply.
Which Tiezheng SFA/T2012 specifications should buyers check?
The published Tiezheng SFA/T2012 specifications include Worktable dimensions: 2000 × 1200 mm; X-axis travel: 2100 mm; Y-axis travel: 1200 mm. Treat travel, cutting capacity, workholding clearance and load as separate limits. Use the full specification table to check the proposed configuration; these values do not by themselves establish material suitability, achievable part tolerance or cycle time.
Read the full Tiezheng SFA/T2012 specification table.
Does this specification confirm suitability for my industry?
Industry labels alone do not establish a machining process. Start with the dimensions, operations and material information you know; a drawing can follow after the first contact. Confirm material grade and hardness, tolerances, stock condition, production volume and fixture requirements with the contact before agreeing the supplied configuration.
How can I compare this model and request a quotation?
Compare up to three models by the same specification label and unit. An omitted value is not zero, and an optional value is not a standard configuration. Keep the model name with your inquiry so the sales team can review the correct machine.
Confirm the SFA/T2012 configuration for your part
Use the published specifications to shortlist this model, then confirm the configuration with the contact listed on this site. Axis travel, workpiece capacity and table load describe different limits; they do not establish finished-part tolerance, material suitability or cycle time. A drawing is optional for the first contact. Machine prices and formal quotations are provided directly by the contact, not by this website.
- Check the published data. Read the available specification labels, units and configuration notes. Ask the contact for missing technical data for this exact model. An omitted value is not zero.
- Confirm the supplied configuration. Ask the contact for configuration-specific technical information. Confirm standard and optional equipment, tooling, workholding and acceptance requirements; do not assume an unlisted feature is included.
- Discuss your requirement. Start with the dimensions and operations you know. Agree a suitable channel for confidential drawings directly with the contact.
Does submitting an inquiry confirm the machine or a quotation?
No. An inquiry starts a discussion. The contact must confirm the proposed configuration and commercial terms with you; submitting a form is not machine acceptance or a formal quotation.
Discuss SFA/T2012 with the contact
