The Tiezheng FA30 BC is a five-axis machining center documented with a 300 mm rotary table, 300 x 200 x 350 mm X/Y/Z travel, 200 kg maximum horizontal load and 100 kg maximum vertical load. Key specifications for this model are listed below. Spindle, control, accuracy and optional equipment are confirmed for the selected configuration during drawing-led RFQ review.
- Process
- Drawing-led five-axis machining within the published table, travel and load envelope.
- Workpieces
- Parts that fit the documented 300 mm rotary table and 300 x 200 x 350 mm X/Y/Z travel; confirm workholding, access and tolerance during RFQ.
Review specifications
The Tiezheng SVA/T4550 is a moving-column machining center with three factory assembly views of the T4550 machine layout. Standard specifications include a 5000 x 500 mm worktable, 4500 x 550 mm X/Y travel, 550 mm standard or 700 mm optional Z travel, a BT40 direct-drive spindle at 12000 rpm and a 24-tool magazine. Confirm your required configuration through RFQ.
- Process
- Moving-column milling, drilling and tapping routes for long parts and profiles; confirm every required operation against the part drawing.
- Workpieces
- Long workpieces and profiles evaluated against the source-listed 5000 x 500 mm worktable, 4500 x 550 mm X/Y travel and selected Z configuration; confirm support, fixturing and tool access through RFQ.
Review specifications
The Tiezheng SVA/T3550 is a moving-column machining center with a 4000 x 500 mm worktable, 3500 x 550 mm X/Y travel, 550 mm standard or 700 mm optional Z travel, a BT40 12000 rpm direct-drive spindle and a 24-tool magazine. Review the factory images and video, then confirm your required configuration through RFQ.
- Process
- Moving-column milling, drilling and tapping routes for long parts and profiles; confirm every required operation against the part drawing.
- Workpieces
- Long workpieces and profiles evaluated against the source-listed 4000 x 500 mm worktable, 3500 x 550 mm X/Y travel and selected Z configuration; confirm support, fixturing and tool access through RFQ.
Review specifications
The Tiezheng VW50A is a vertical-horizontal compound machining center documented by an exact-model machine image and the reviewed VW50A parameter-sheet column. The source lists a 500 x 500 mm worktable, 600 kg load, BT40 tool holder, 8000 rpm standard spindle speed, 12000 rpm optional direct-drive speed, 24/24 horizontal and vertical tool positions, and 32/32/32 m/min rapid traverse. Final configuration requires RFQ confirmation.
- Process
- Compound vertical and horizontal machining layout; confirm required milling, drilling, boring and tapping operations against the part drawing.
- Workpieces
- Parts evaluated against the source-listed 500 x 500 mm worktable, 600 kg load and 500 / 900 mm maximum workpiece height / diameter entry; confirm fixture and tool access through RFQ.
Review specifications
The Tiezheng WHH63 is an opposed horizontal machining center documented with a 630 x 630 mm rotary worktable, an optional 1300 x 600 mm fixed table, 1000 x 700 x 900 mm X/Y/Z travel, 2500 kg table load, BT50-190 spindle taper and 4000/6000 rpm spindle options. Buyers should confirm controls, workholding, tooling, automation, utilities and acceptance requirements through RFQ.
- Process
- Opposed horizontal machining layout; confirm the required milling, drilling, boring and tapping operations against the part drawing.
- Workpieces
- Parts that fit the reviewed 630 x 630 mm rotary worktable, optional 1300 x 600 mm fixed table, 1000 x 700 x 900 mm X/Y/Z travel and 2500 kg table-load limit; confirm fixture and cutter access through RFQ.
Review specifications
Tiezheng horizontal machining centers support multi-side milling, drilling, boring and tapping projects where pallet orientation, fixture access, work envelope and chip control must be reviewed together. This category page introduces the WH63A model, machine and workshop media, selection guidance, service information and a direct RFQ path; capacity is confirmed for the selected machine.
- Process
- Multi-side milling, drilling, boring and tapping review. Exact capability depends on the released model, tooling, fixture, pallet strategy, workpiece drawing and reviewed configuration.
- Workpieces
- Housings, boxes, valve bodies, manifolds and similar parts that may benefit from multi-face access after drawing, fixture and process review.
Review specifications
The Tiezheng WH63A is a horizontal machining center documented with a 630 x 630 mm worktable, 1050 x 770 x 900 mm X/Y/Z travel, 1200 kg table load, BT50-190 spindle taper and 4000/6000 rpm spindle options. Buyers should confirm rotary-table indexing, control, tooling, workholding, chip handling and acceptance requirements through RFQ.
- Process
- Horizontal machining with rotary-worktable indexing; confirm milling, drilling, boring and tapping operations against the part drawing.
- Workpieces
- Prismatic parts that fit the reviewed 630 x 630 mm worktable, 1050 x 770 x 900 mm X/Y/Z travel and 1200 kg table-load limit; confirm fixture and cutter access during RFQ.
Review specifications
The Tiezheng VS650 is a vertical dual-pallet linear-guide machining center documented with two 650 x 500 mm tables, 1600 x 550 x 500 mm X/Y/Z travel and a 500 kg maximum table load. The reviewed source lists a BT40 spindle with 8000 rpm belt-drive standard and 12000 rpm direct-drive option. Final control, tooling, workholding, chip handling and acceptance requirements remain subject to RFQ.
- Process
- Vertical milling, drilling and tapping in a dual-pallet layout; confirm the required operation sequence, tooling and fixture access against the part drawing.
- Workpieces
- Parts that fit the reviewed 650 x 500 mm tables, 1600 x 550 x 500 mm X/Y/Z travel envelope and 500 kg table-load limit; confirm fixture height and transfer clearance during RFQ.
Review specifications
The Tiezheng VT840 is a vertical drilling and tapping center documented in A/B spindle configurations. The reviewed matrix records a 1000 x 400 mm table, 800 x 400 x 350 mm X/Y/Z travel and 350 kg table load. Buyers should confirm the required spindle variant, control, workholding, tooling, automation and acceptance plan through RFQ.
- Process
- Vertical drilling and tapping, with A/B spindle configurations documented in the reviewed source; confirm any milling duty against the part drawing.
- Workpieces
- Parts that fit the reviewed 1000 x 400 mm table, 800 x 400 x 350 mm X/Y/Z travel envelope and 350 kg table-load limit; confirm workholding and cutter access during RFQ.
Review specifications
The Tiezheng VT640 is a vertical drilling and tapping center documented in A/B spindle configurations. The reviewed matrix records a 700 x 400 mm table, 600 x 400 x 350 mm X/Y/Z travel and 350 kg table load. Buyers should confirm the required spindle variant, control, workholding, tooling, automation and acceptance plan through RFQ.
- Process
- Vertical drilling and tapping, with A/B spindle configurations documented in the reviewed source; confirm any milling duty against the part drawing.
- Workpieces
- Parts that fit the reviewed 700 x 400 mm table, 600 x 400 x 350 mm X/Y/Z travel envelope and 350 kg table-load limit; confirm workholding and cutter access during RFQ.
Review specifications
