What is this machine used for?
What is the Tiezheng TC50B500L?
The Tiezheng TC50B500L is a 45-degree slant-bed CNC lathe with a Ø500 mm maximum swing, 220 mm X-axis travel, 550 mm Z-axis travel, 500 mm chuck-supported workpiece length and 4200 rpm maximum spindle speed. It uses an 8-inch standard hydraulic chuck and supports hydraulic or servo tailstock configurations for buyer-specific production needs.
What workpiece sizes can the TC50B500L handle?
The machine has a Ø500 mm maximum swing over the bed, a Ø380 mm maximum disc-type cutting diameter, a Ø51 mm maximum bar diameter and a 500 mm maximum workpiece length with the chuck.
Which spindle and chuck specifications are available?
The spindle uses an A2-6 standard nose, a 1:20 spindle-bore taper and a Ø66 mm spindle bore. Maximum spindle speed is 4200 rpm, and the standard hydraulic hollow power chuck is 8 inches.
How are chips removed from the TC50B500L?
Manual chip removal is standard. An automatic scraper-chain conveyor is optional. Chip discharge can be arranged to the right or rear according to the supplied configuration.
How should buyers prepare a TC50B500L RFQ?
Send the workpiece drawing, material, stock form, critical dimensions and tolerances, required operations, annual volume, target cycle time, workholding requirements, electrical standard and destination country. The supplied tailstock, chip-removal arrangement and other configuration-dependent items are confirmed during engineering review.
What is the TC50B500L bed inclination?
The bed inclination is 45 degrees.
What are the TC50B500L X- and Z-axis travels?
X-axis travel is 220 mm and Z-axis travel is 550 mm.
What is the TC50B500L spindle-bore taper?
The spindle-bore taper is 1:20.
What chuck is standard on the TC50B500L?
The standard chuck is an 8-inch hydraulic hollow power chuck.
Which tailstock saddle types are listed?
The specification lists hydraulic and servo tailstock saddle configurations. The supplied arrangement is confirmed during the RFQ.