What is this machine used for?
What is the Tiezheng VW80C?
The VW80C is part of Tiezheng’s VW-series machining-center range. Its key specifications cover worktable, load, supported workpiece dimensions, spindle, tooling, motion, utilities and machine envelope for initial comparison. Configuration details are confirmed during drawing-led RFQ review, and the final supply scope is defined in the signed technical agreement.
Which worktable and workpiece limits are documented?
The catalog lists an 800 x 800 mm worktable, 1800 kg maximum worktable load and an 800 / 1500 mm maximum workpiece height / diameter entry. Confirm fixture height, rotary clearance, tool access, support and the paired-value interpretation against the actual part drawing.
Which spindle, tooling and motion values can be screened?
The published specifications list a BT50 tool holder, 6000 rpm catalog-listed standard vertical / horizontal spindle speed, 18.5 / 18.5 kW spindle motor power, 24 / 24 tool positions and 24/24/24 m/min X/Y/Z rapid traverse. Final spindle, magazine and axis configuration remains subject to RFQ confirmation.
Which details require RFQ confirmation?
Confirm directional work-envelope values, spindle-to-table ranges, custom division, tool diameter, servo values, pressure, optional spindle and chip-removal methods, magazine structure and controller architecture for the selected configuration during RFQ review.
How should buyers compare the VW80C?
Use the documented table, load, workpiece entry, spindle, tooling, traverse, utility and installation rows for initial screening, then confirm clearances and the complete machine configuration through RFQ.
What should be sent for a VW80C RFQ?
Send 2D and 3D part drawings, material, hardness, machining allowance, critical tolerances, surface finish, workpiece mass and envelope, annual volume, target cycle time, required operations, control and spindle requirements, tooling, workholding, automation, coolant and chip-handling needs, electrical standard, acceptance method and destination country.