What is this machine used for?
Discuss this configuration View specifications
Check the configuration against your part
For a shaft or sleeve, review chuck engagement, supported length and the full operation sequence. For a disc or flange-shaped component, review the documented 530 mm turning diameter together with swing diameter, jaw projection and tool access. These are evaluation routes, not an approval of the complete setup.
Configuration and acceptance
The listed values describe documented specifications; they do not establish the complete standard supply. Confirm the CNC, tooling, workholding, spindle duty and acceptance conditions in the quotation. Optional items require explicit selection.
Axis travel is not guaranteed workpiece clearance. Machine positioning and repeatability figures do not guarantee finished-part tolerances. Review the drawing, material, fixture and inspection method together.
Before choosing this machine
How should I compare a shaft and a disc-shaped part?
For a shaft, check the chuck engagement, supported length and operation sequence. For a disc-shaped part, check swing diameter, turning diameter and tool approach. Ask for a drawing review before selecting the setup.
Does this page confirm a material or automated loading system?
No material or loading-system compatibility is confirmed here. Tell us the material, part form and loading requirement so the team can review the proposed configuration.
What should I send with an inquiry?
Send the drawing or part dimensions, material and operations required. Add the quantity, critical tolerances and loading preference if known. Include the model code so we can review the selected configuration.
Do the specifications define the complete standard supply?
No. A listed specification does not establish the complete standard supply. Confirm the selected CNC, spindle duty, toolholding, workholding and any optional items in the final quotation.
Compare machine requirements
Discuss this configuration
Confirm the TC70B1600L configuration for your part
Use the published specifications to shortlist this model, then confirm the configuration with the contact listed on this site. Axis travel, workpiece capacity and table load describe different limits; they do not establish finished-part tolerance, material suitability or cycle time. A drawing is optional for the first contact. Machine prices and formal quotations are provided directly by the contact, not by this website.
- Check the published data. Read the available specification labels, units and configuration notes. Ask the contact for missing technical data for this exact model. An omitted value is not zero.
- Confirm the supplied configuration. Ask the contact for configuration-specific technical information. Confirm standard and optional equipment, tooling, workholding and acceptance requirements; do not assume an unlisted feature is included.
- Discuss your requirement. Start with the dimensions and operations you know. Agree a suitable channel for confidential drawings directly with the contact.
Why is TC70B1600L workpiece length 1580 mm when both Z travel and chuck-to-centre distance are 1600 mm?
The listed Z travel is 1600 mm, the chuck-face-to-tailstock-centre distance is 1600 mm, and maximum workpiece length with chuck is 1580 mm. These describe axis movement, an installed reference distance and a workpiece-length limit respectively. They do not guarantee full-length tool access to any part that fits between the supports. Confirm jaw engagement, centre support, tool projection and the end operations required for the actual setup.
Does submitting an inquiry confirm the machine or a quotation?
No. An inquiry starts a discussion. The contact must confirm the proposed configuration and commercial terms with you; submitting a form is not machine acceptance or a formal quotation.
Discuss TC70B1600L with the contact
