Model 2DSF-TV08-10HSP. 14–15 sec cycle. 10 servo power heads. HT300 cast iron. Built for high-volume pipe fitting and parking brake sleeve production.
Engineered for maximum rigidity and precision in continuous high-volume production.
| Bed Material | HT300 cast iron, one-piece casting |
| Aging Treatment | Triple aging: 600° pre-machining + 450° post-machining + vibration aging |
| Structure | Integral casting, no joints — ensures long-term geometric stability |
| Indexing | Servo turntable, 1/8 second per station (0.125s) |
| Fixture | Hydraulic synchronous clamping |
| Chip Removal | Built-in chip conveyor (chip conveyor) |
| Power Head Type | 110 servo power heads (×10) |
| Spindle Bearings | NSK / NTN imported原装轴承 |
| Spindle Accuracy | 0.005 mm |
| Cooling | Water cooling system (with pump) |
| Oil Tank | 150 L capacity |
| Coordinate System | Absolute coordinate setting |
| Typical Cycle Time | 14–15 seconds / piece |
| Sample Part | Parking brake sleeve (parking brake thread sleeve) |
| Material | Ferrous metals (Fe / iron) |
| Operations | Boring, tapping, drilling, OD turning, facing, chamfering, slotting, thread milling |
| Control Interface | PCL simplified operation panel |
| Positioning Accuracy | ±0.005 mm |
Each station performs simultaneous operations — all 10 axes work in parallel across the 8-station rotary turntable.
| Station | Left Power Head | Center / Support | Right Power Head | Operation |
|---|---|---|---|---|
| 1 | — | 靠山 Work stop |
— | Load / unload part. Blow clean. Mold open/close. |
| 2 | — | 110 Servo (R#1) Spindle motor |
110 Servo (R#1) Drilling |
Drill bore / hole |
| 3 | 110 Servo (L#1) Drilling |
靠山 Work stop |
— | Drill bore (opposite side) |
| 4 | — | 110 Servo (R#2) OD + Face + Chamfer |
110 Servo (R#2) Turning |
Outer diameter turning, facing, chamfer |
| 5 | 110 Servo (L#2) OD + Face + Chamfer |
靠山 Work stop |
— | Outer diameter (opposite), face, chamfer |
| 6 | 110 Exp. Head (L#3) Slotting |
— | 110 Exp. Head (R#3) Slotting |
Dual-side slot milling |
| 7 | 110 Exp. Head (L#3) Slotting |
— | 110 Exp. Head (R#4) Slotting |
Extended slot milling (continued) |
| 8 | 110 Servo (L#5) Tapping |
— | 110 Servo (R#5) Tapping |
Dual-side thread tapping — cycle complete |
Note: L = Left-side power head · R = Right-side power head · Exp. = Extension/slotting head · 靠山 = Work stop
8-Station 10-Axis Fully Servo Water Wheel SPM — Simultaneous 10-axis machining demonstration
The 2DSF-TV08-10HSP is optimized for high-volume multi-operation parts where cycle time and precision are both critical.
Elbows, tees, couplings, valves
Drilled, turned, tapped, chamfered
Multi-operation tube fittings
Precision turned parts
Submit your part drawings — APEX engineers will simulate the process and confirm cycle time before you commit.
Get Cycle Time Estimate WhatsApp →